Product Details:
Payment & Shipping Terms:
|
| Product Name: | C Z Purlin Roll Forming Machine | Control System: | PLC Control |
|---|---|---|---|
| Color: | As You Choose | Speed: | 12-15m/min |
| Thickness: | 0.3-0.7mm | Power Supply: | 380V, 3-Phase,50Hz |
| High Light: | c z purlin roll forming machine,metal stud roll former |
||
Product description
C/Z-shaped steel is widely used in the purlins and wall beams of steel structures, and can also be combined into lightweight building trusses, brackets and other building components. Also, it can also be used for columns, beams, and arms in mechanical light manufacturing.
A cold-bending forming machine is a machine that continuously bends a metal strip such as a coil or a strip by a multi-pass forming roll which is sequentially arranged to form a plastic working process of a specific section profile.
Technical Parameter
| Control System | PLC Inverter Encoder Touch Screen |
| Main Frame | 400mm H-Beam |
| Total Power | 22 kw |
| Power Supply | 380V, 3-Phase,50Hz |
| Forming Speed | 12-15m/min |
| Roll Station | 18 stands |
| Roller Diameter | 110mm |
| Effective Width | 80-300mm |
| Feeding Thickness | 0.3-0.7mm |
| Backboard Thickness | 20mm |
| Cutter Standard | GCr12 |
| Roller Standard | Gcr15# |
| Total Weight | About 10T |
Main Components
| No. | Name | Quantity |
| 1 | Uncoiler | 1set |
| 2 | Coil sheet guiding device | 1set |
| 3 | Main roll forming system | 1set |
| 4 | Punching device | 1set |
| 5 | Cutting device | 1set |
| 6 | Hydraulic station | 1set |
| 7 | PLC control system | 1set |
Forming Processing.
Hydraulic de-coiler - Leveling machine - Servo feeding - Punching machine - Roll forming machine- Out table
Features:
1. The equipment control is PLC control, and multiple safety protection is set during normal production.
2. The bed is welded with steel plates. It is also tempered to eliminate internal stress and avoid deformation of the fuselage.
3. The forming frame is cast iron structure and tempered. High strength and long service life.
4. The material of the roll shaft is 40Cr, and the hardness is HB280 after quenching and tempering treatment.
5. The material of the forming mold is GCr15, quenching treatment, hardness: HRC 56-62 °C.
6. The transmission structure is gearbox transmission. Each molding frame has a gearbox that guarantees time-out, high-intensity operation, and long service life.
Operation and Maintenance :
1. If you need to adjust the machine, please firstly stop the machine before carrying out relevant operations.
2. Chain wheel, bearing and speed reducer of two / three / waves high road way guard rail roll forming machine should be lubricated regularly.
3. The forming roller should be kept clean.
4. With high performance in operation, two / three / waves high road way guard rail roll forming machine generates little noise.
