Payment & Shipping Terms:
|Name:||H Beam Welding Line||After-sales Service Provided:||Commissioning And Training ,Online Support, , Field Maintenance And Repair Service, Video Technical Support|
|Warranty:||1 Year||Flange Thickness:||200-800mm|
|Material:||Galvanized Sheet(Gi),Cold Roll Steel(CRC)||Type:||Automatic, SAW, Steel Frame|
h beam flange straightening machine,
automatic submerged arc welding machine
Double / Single Cantilever T-Beam Submerged Welding Machine Line
Automatic clamp and centralize the web and flange, alignment and welding, can improve the working efficiency by more one time than similar products. The main engine drive is controlled by imported AC frequency adjustor to make sure stable and reliable. There is pilot arc device to ensure welding quality.
The positioning of web and flange is realized with hydraulic drive, on the two sides, the mechanical clamping and centralizing is acted synchronously, to ensure web and flange positioning with various sizes within allowed range.
The automatic centralizing is accurate and needless to adjust each time(no center deviation wheel for minor adjustment). When assembling, there is automatic hydraulic holding frame which can go up and down, to make sure web and flange are in matched position. The upper beam has 4pairs of guide on the left and right to make sure stabilization.
The automatic welding system is driven by light cylinder without compressed air source. The inlet and outlet table roller and inlet tension rod are sectional type, and can add and remove according to customer need.
The main motor uses AC frequency transforming speed adjustor to control speed. The hydraulic system has standard products with precision filter, to ensure long life and stable function of magnetic valve.
Service and warranty:
|Check and acceptance||Accept according to technical agreements and contract between each other.|
1 according to supply scope, provide complete and effective documents.
4 all the pipes and wires, with correct joint and reliable joint. They should be arranged in order, correct, firm and neat. There should be necessary protect, no wrinkle, shrink or cracks and etc.
|After Sales||After the test and acceptance, the machine has 12 months warranty.
And after the 12 months warranty period, we also supply whole life technical support and repair service. And provide spare parts in low prices to user.
1 , Instruction manual, including electric and hydraulic illustrative diagram and easy damaged parts list.
2 , User manual of frequency converter, hydraulic bump station.
3 , Packing list
4 , Certification
5 , Foundation drawing for installation.