Payment & Shipping Terms:
|Product Name:||Sheet Metal Slitter Machine||Color:||Any Color At Your Request|
|Control:||PLC Control||Width Range:||600-1600mm|
|Warranty:||1 Year||Usage:||Slitting Coil|
steel sheet slitting machine,
sheet metal slitter machine
Automatic sheet metal slitter machine metal slitting line for hot rolled coils
Sheet metal slitting line including uncoiling, pre-leveling, leveling, cutting and stacking work. The CTL line can make sure of accurate feeding and shearing. It can be widely used in cold or hot rolling carbon steel, tinplate, stainless steel and all the other kinds of metal materials.
Hydraulic entry coil car
1. The car can move levelly and vertically, which is convenient for putting the steel coils into the de-coiler.
2. It is driven vertically by the hydraulic cylinder with four guide pillars.
3. The level movement is driven by 1.5KW cycloidal motor.
Hydraulic cantilever un-coiler
1. Supporting steel rolls and uncoiling.
2. It can expand and shrink with a hydraulic oil cylinder and fit with the inner hole of the steel coils and is equipped with a supporting stand.
3. Moment motor drives the coils running and the motor can run right and left to prevent the coils running by inertia.
Hydraulic press and pinch and feed device
1. Two hydraulic oil cylinders control the lifting of rollers.
2. Hydraulic telescopic shovel and hydraulic press and hit the head device, etc to feed the plate.
3. Hydraulic pinch and feed device: driven by the cycloid pinwheel decelerator and equipped with a hand clutch. The pinch rollers adopt the hydraulic oil cylinder to press down. It is driven by down rollers.
Hydraulic head-cutting machine
1. Adopt two columns structures, a press device, can cut the 3mmX1600 steel plates;
2. The up and down blades which are alloy material 9CrSi can adjust their gap;
3. The machine is used for the steel shear and to make the plate easy to slitting machine.
Side guide device
1. It uses the vertical rollers of both sides to guide the plates into the slitting machine correctly.
2. The guide rollers are adjusted by the rods on both sides. The width range is 500-1600mm.
3. It is equipped with the hydraulic press and damping device to make sure the slitting precision.
1. Power part: This is composed of power-stand, decelerator, 55KW direct current motor, gear distributing case, coupler, spindle, connecting-cover, etc.
2. Host machine: This is composed of bottom-stand, fixed bracket, big slide, knife pivot (φ180mm, 2pcs), movable bracket, slide, the front and back adjustable device of bracket, knife pivot lifting and pressing down adjustment device, accompany of blade, separating cover, rubber band, and 10 blades with the machine.
3. It changes the blades through moving out the bracket hydraulically and is very convenient and fast.
1. It consists of a base, the shaft, and plate of scrap material, a friction wheel, a supporting wheel chain, a chain, a decelerator, and a 7.5Kw electric machine.
1. This is composed of frame, preliminary dividing shaft, bracket, pressing shaft, hydraulic damping device, lifting and pressing device for pressing shaft, set of dividing slice and cover, etc.
1. It adopts the hydraulic expand and shrink recoiler shaft to tight the inner hole of coils.
2. It uses the hydraulic movable arm with the supporting spacers to ensure the even recoiling quality.
3. It is equipped with the push device to help unload the coils.
4. The motor is DC 75KW with 590 controllers to ensure the recoiling.
Hydraulic exit coil car
1. This car carries the finished coils and a movable lift.
Electric control system:
1. Electric cabinet and operating table, all the electrical parts are the international brand, such as Omron, Schneider, and Siemens. We will order these elements for you and will inform you which kind of brand we adopt.
Hydraulic stand and pipe .etc
According to the international maritime standards:
1. Use steel wire and wood to fixed the large machines;
2. Use shockproof film to protect the external motor.